SafetyLink ConcreteLink Collared Eyebolt

WHAT AM I USED FOR?

An anchor point designed for use in concrete, where the eyebolt will remain exposed for attachment.

For use in concrete.
Low Profile.
Must be chemically fastened (Chemical Adhesive).
Multi-directional fall protection.
Single Person Anchor.
Rated at 15kN.
Complies with Australian and New Zealand Standard AS/NZS 1891.4.
Fall arrest and rope access anchor.

Product Description Quantity Concrete Insert 304SS 1 Collared Eyebolt 316SS 16mm thread 1

Positioning Of Concretelink Anchor Point
(refer to appendix diagrams 2 and 3 of the Handbook)

The first ConcreteLink Anchor Point must be in a position easily and safely reached by a secured ladder or a manhole access point.

Testing for Free fall-arrest for one person. 15 kN ultimate strength.
1. To comply with Australian Standards each ConcreteLink unit must be tested after installation.
2. Allow sufficient time for curing before testing, see instructions on fastener container.
3. Test consists of ultimate pull out force proof loading to 50% of design purpose of anchorage.
4. Recommended chemical anchor: Hilti RE500 or Hilti HY200 as per Hilti Product Supplement Data Sheets. Read instructions on product carefully. The entire surface of the ConcreteLink unit that is in contact with the concrete must have sufficient adhesive gel, as specified on the product.